Office Partition FAQs – Questions & Answers

Office partition prices in Kenya vary depending on the partition system, dimensions, materials, doors, hardware, acoustic requirements, finishes and installation conditions. Frameless glass, aluminium, gypsum, acoustic, EPS, double-glazed and movable partitions have different specifications and therefore different costs. For preliminary budgeting, use our office partition cost calculator .

The main factors include:

• Partition type
• Total partition area
• Partition height
• Glass or panel specification
• Glass thickness
• Number and type of doors
• Locks and door hardware
• Acoustic requirements
• Finishes and branding
• Project quantity
• Site access
• Installation conditions

Partitioning can be estimated using a square-metre rate, particularly during preliminary budgeting. However, a final quotation may also include doors, hardware, profiles, installation, transportation and other project-specific requirements.

Yes. Preliminary pricing can often be prepared using architectural drawings, floor plans, dimensions and photographs. A site visit may be required before the final quotation, particularly where existing conditions, access or building restrictions need to be assessed.

Yes. Our Office Partition Cost Calculator can be used to generate a preliminary budget based on partition type, dimensions, doors and installation conditions.

Frameless glass partitions use glass panels with minimal visible framing. They are commonly used in modern offices, boardrooms, executive offices, meeting rooms and reception areas where transparency and a clean architectural appearance are desired.

Glass partitions can be designed using appropriate safety glass and suitable hardware for the intended application. Glass selection should consider the location, panel size, doors, impact exposure and applicable project requirements.

Depending on the design and specification, office partitions may use toughened/tempered glass, laminated safety glass, double glazing or other specified glass configurations.

Yes. Privacy can be improved using frosted film, sandblasted effects, patterned film, tinted glass, blinds or other specified treatments. The appropriate solution depends on whether visual privacy, acoustic privacy or both are required.

Yes. Company logos, decorative graphics, privacy bands, frosted patterns and other branding treatments can be applied to suitable glass surfaces.

Yes. Glass partitions are frequently used for boardrooms and meeting rooms. Where confidentiality is important, the glass and partition system should be specified with appropriate acoustic and privacy requirements.

Aluminium office partitions use aluminium framing combined with glass, boards or other infill materials. They are a practical option for offices requiring defined rooms, durability and a structured partition system.

The total cost depends on the exact specification, profile, glass, infill, doors, hardware and installation. Therefore, the two systems should be compared using equivalent specifications rather than assuming one is always cheaper.

Some aluminium partition systems are designed to be demountable or reconfigurable. The suitability depends on the specific system and how frequently the office layout is expected to change.

Yes. Gypsum partitions are widely used to create private offices, meeting rooms, storage areas and other enclosed spaces.

Gypsum partitions provide visual privacy because the wall is opaque. Acoustic performance depends on the wall construction, insulation, thickness, joints, doors and other details.

Yes. Properly prepared gypsum surfaces can be painted in a wide range of colours and finishes.

Partition systems can be designed to improve acoustic privacy, but performance varies significantly between systems. Acoustic performance depends on the wall construction, glass configuration, insulation, seals, doors, ceiling, floor and other surrounding elements.

The appropriate acoustic solution depends on the required level of privacy and the room's construction. Options may include acoustic solid partitions, acoustic glazing, double-glazed systems, insulated wall systems and acoustic doors.

Glass partitions can be designed for improved acoustic performance. Double glazing, laminated acoustic glass, appropriate framing and effective seals can be considered where higher sound isolation is required.

Depending on the partition system, options can include:

• Frameless glass doors
• Aluminium framed glass doors
• Timber or flush doors
• Acoustic doors
• Sliding doors
• Automatic doors for suitable applications

This depends on the quotation. Doors should normally be identified separately in a detailed quotation because their type, hardware and specification can have a significant effect on the project cost.

Installation time depends on the size and complexity of the project, partition type, number of rooms, doors, site access and whether the office is occupied. A project programme can be prepared after reviewing the scope of works.

In many cases, yes. Work can be planned in phases or during agreed working hours to reduce disruption. Building management requirements and site access should be considered before installation.

Existing partition removal can be included where required. The scope should identify dismantling, disposal, making-good works and installation of the new system.

Partition installation methods depend on the selected system and existing floor construction. The fixing method should be agreed based on the building and finish requirements.

Yes. Office partitioning can be planned as part of a wider office space-planning and fit-out project. The layout can consider private offices, meeting rooms, boardrooms, reception, workstations, circulation and collaboration areas.

Yes. Combining different partition systems can provide a balance between transparency and privacy. For example, a meeting room may use glass on one elevation and a solid partition on another elevation.

Yes. Partition layouts, glass treatments, colours, profiles, doors, hardware, branding and other elements can be specified according to the project requirements.

Glass surfaces can generally be cleaned using suitable glass cleaning products and a soft, non-abrasive cloth. Avoid abrasive materials that may damage the glass, film or hardware.

Aluminium frames should be kept clean and inspected periodically. Hardware, handles, hinges and other moving components should also be checked where necessary.

Depending on the system, individual glass panels, boards, hardware, seals or other components may be replaced without rebuilding the entire partition.